Pump Type: Centrifugal slurry pump
Drvie Type: ZVz/CRz/CV/DC
Power: Motor / Diesel
Intake/Discharge: 1.5″/1″
Max Capacity: 30 m3/h
Max Head: 68m
1.5/1 H Slurry pump
$1500
Description
1.5×1 H Centrifugal Heavy Duty Slurry Pump is 1 inch slurry pump, designed for handling highly abrasive,high density slurries with excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost.
The pump can be used in many applications, such as Pipeline transport, High velocity hydraulic transport, Mineral processing, Coal prep, Cyclone feeds, Aggregate processing, Fine primary mill grinding, Chemical slurry service, Tailings, secondary grinding, Industrial processing, Pulp and paper, Food processing, Cracking operations, Ash handling.
High chrome slurry pump assembly drawing
Rubber slurry pump assembly drawing
Slurry pump spare parts material list
| H series slurry pump model list | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| The above performance is based on clean water test |
H series Slurry Pump Structure
Slurry Pump Wetted Parts
Liners – Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance.
Impeller – Hard metal and molded elastomer impellers are completely interchangeable. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Throat bush – Hard metal and molded elastomer impellers are completely interchangeable. Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
Parts No.
018：Cover Plate Liner
013：Cover Plate
032：Frame Plate
036: Frame Plate Liner
041: Frame Plate Liner Insert
060: Intake Joint
083：Throat bush
110：Volute Liner
122: Stuffing Box Seal
124: Volute Cover Seal
132: Discharge Joint
147: Impeller
H series Slurry Pump Shaft Seal
Gland Seal
Most popular type of seal. Clean water at a certain pressure being injected into the packing through the lantern restrictor, preventing leakage from casing.
Expeller Seal
The expeller generate a reverse centrifugal force to prevent the leakage. Suitable for most slurry pumping applications providing a major advantage where no gland water is required.
Mechanical Seal
Mechanical seal is used for applications where no extra substance is allowed to mix with the fluid being pumped, such as chemical or food industry.
