When the water pump suck water from the water pond, since inverted suction type in used, it can make the suction tube filled with water, after pump starts, eliminating the need for irrigation exhaust can be quickly into operation to improve the automation of pump start and reliable level. […]
1. Before to use submersible slurry pump, the motor cavity must be filled with water, running without water is strictly prohibited. […]
1. Prohibit anhydrous Run, do not adjust suction to reduce the pump capacity, lower flow working is forbidden […]
IMPELLER REMOVAL As the wear life of LIBRA wet end parts continues improving, the corresponding maintenance interval increases. Longer life and harsh duty conditions can result in the impeller to lock tighter on the shaft over time and make routine removal difficult. […]
Slurry pumps can transport medium with solids and gravel without blockage. So slurry pumps are used in most harsh conditions. Because of the medium, slurry pumps damage is heavily, we must know something of daily maintenance. First, check working performance […]
1, Air in inlet pipe and the pump body: (1) Not filled enough water before starting of the slurry pumps, sometimes water overflow from the air vent mostly, but without rotation of shaft to have air completely discharged, there will be a little air remains in the inlet pipe or slurry pump. […]
The following two paragraphs illustrate two issues respectively, one issue is the factors that influence the efficiency of centrifugal pump package, and the other is measures that can be taken to improve technical ability and reduce energy consumption. […]
No water into slurry pump Reasons 1. Turning is wrong or the slurry pump impeller is damaged. 2. Suction pipe is blocked. […]
Gland packing seal requires continuous liquid lubrication and cooling between the rotating shaft sleeve and the compressed packing, to prevent over heating due to the friction. […]
Slurry pumps are often used in industrial processes, they perform in a manner similar to centrifugal pumps. They are usually used to maintain liquid mixtures with sound substrates in constant motion. […]
