Slurry Pump Operation Test Requirements
1. Check all the slurry pumps’ direction of rotation should be the same with motor 2. The fixed joints should be no loose and lubricating parts should be lubricated according to the technical requirements […]
Standard operation procedure of slurry pump
Standard slurry pump operation procedure before running 1. Check if the rotation direction of motor is corresponding to the regulated rotation direction of slurry pump, and please refer to the relevant instruction book. When checking the rotation direction of motor, the motor should be tested alone, and it must not be connected with slurry pump. […]
Slurry Pump Operation Test
Slurry Pump Operation Test 1. Check all the slurry pumps’ direction of rotation should be the same with motor […]
Ways to improve slurry pump working life
There are ways to improve the slurry pump working life, here bellow are some ones could help you […]
Strengthen the maintenance of slurry pump
Adjust the gap between impeller and liner and plate. The gap had been adjusted before out factory, but after working for a time, due to the high-pressure of volute liner and low-pressure of suction, caused the slurry leakage through the impeller gap, inevitably lead to the impeller and plate or volute liner seal segment wear and [...]
Washery slurry pumps you should know
Slurry pumps have been widely used in coal washing process, but what exact process in need of slurry pumps, what kind of slurry pumps will suit the condition, bellow we will talk something about it. […]
Vibration-based fault diagnosis of slurry pump impellers using neighbourhood rough set models
Rough set models have been widely used as a method for feature selection in fault diagnosis. A neighbourhood rough set model can deal with both nominal and numerical features, but selecting the neighbourhood size for its application may be a challenge. In this article, the authors illustrate that using a common neighbourhood size for all features [...]
Slurry pumps working in series
Slurry pumps works in series are widely used to match some requirements. It will supply higher head to the pump system. First pump outlet connect to next pump inlet, this is how it works. […]
Mechanism and influencing factors of Slurry pump wear problem
There are so many factors of slurry pump wear, including Medium characteristics: the solid particles nature, concentration, pH, etc. Operating conditions: such as the pump flow rate, head and speed […]
Coal Prep Plants
Libra Slurry pumps could be used in Coal Prep Plants […]